Choosing Upvc Window Replacement Hinges
Selecting and fitting upvc windows replacement hinges isn't as complicated as you think. It is crucial to ensure that the arrow on the hinges is facing the right way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.
There are several different types of hinges, each with their distinctive characteristics. This article will review some of the most commonly used uPVC hinges and their benefits.
Egress/Easy Clean Hinge
These windows are an excellent choice to replace or upgrade your fire escape window as they open to a full 90 degree angle. They can also be removed to an easy clean position to allow you to easily reach the outside of your windows to clean them without climbing on a ladder or lean over at angles that could be dangerous.
These heavy-duty egress hinges are manufactured by Yale which is among the most well-known and reliable home security brands available today. These hinges can be used with any kind of uPVC side-hung windows. They can be moved to the easy-to-clean position by pressing in a small button and then sliding the window sash to one side. When the window is closed, the sash will be returned to its original position.
They are available in both 13mm and 17mm stack heights. Depending on the size of your existing window we recommend using our Egress Selection Guide to determine which product is best for your needs.
The hinges are designed to be used in conjunction with a standard side-hung frame, either uPVC or aluminium. They are equipped with a simple friction screw to adjust the amount of resistance generated. This makes it easier to open the window and reduces the possibility of an accidental closure during strong winds. They have been cycle tested to over 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
glass door hinge repair near me RepairMyWindowsAndDoors is simple to use and does not have buttons or catches. It provides a convenient and safe solution to emergency exit and cleaning. First, open the window to the egress (full opening) position and then press the hinge retaining clip located on the inner side of the bottom corner. This will open the bottom and top catches, allowing you to move the sash into an easy-clean position. Once in the easy-clean position close the window to reset the hinges back to their original position.
Fire-Escape Hinge
Fire Escape Hinges, often known as "Easy Clean" hinges are used to replace side opening windows to allow escape (fire safety) reasons. These kinds of hinges for windows open more wide and faster than conventional hinges to provide a large clear opening to escape in the event of an emergency fire. This kind of hinge is legal in any living space that has windows, as stipulated by building regulations.
The windows have the benefit of a friction stop that allows them to open at 90 degrees. They also let the opening sash to slide across the glass when it's opened which allows for easy cleaning without having to climb ladders. The hinges aren't flimsy buttons or catches, and are operated by a simple, safe lever that is accessible from the inside of the home.
The hinges are produced in the UK by Cotswold and come complete with a child safety restraint for day to day use which can be turned off with a hidden button, providing you with peace of mind that your children won't accidentally open the door too far. They are available in 13mm and 17mm stack heights.
Find the length of the current side-hung window hinge, which is fixed to the frame. (See the guide for measuring upvc window hinges). Choose the right size hinge from the list below.
Note that this measurement is taken at the hinge's part that connects to the frame and not the sash. The actual length of the hinge could be shorter or longer depending on the way your old windows were manufactured. When choosing the width of the hinge most frames made of upvc will have a stack height of 13mm, but if your old window frame has 17mm, then select this option. You can also opt for the 4mm packer in order to compensate for the difference. All hinges are supplied handed (1 left and 1 right). The hinges are not equipped with screws. They can be purchased separately if needed. Our upvc window repair screws are highly recommended. These screws are designed to improve your hinges' performance and allow them to work smoothly for longer. They have a reduced friction design and an improved weather seal, with a brand new nylon reducer end cap.
Restricted Hinge
There are occasions windows need to open fully and this can be difficult using hinges that are standard. These child safety friction hinges are a fantastic solution to this issue. They can be used in situations where ventilation is required but cleaning or escape from a fire is not possible. They work by restricting the amount the sash can open, and allow for the override of this restriction with the push of a button. They work with both top and side hung windows. They are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction hinge combines the characteristics of a standard restrictor as well as a fire escape hinge to provide an efficient and simple method to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It is offered in a pair, where one hinge is the restricted egress and the other free, allowing one to be fitted to the bottom of the sash while the other hinge is installed to the top.
These uPVC hinges are made to be used with windows that aren't able to be fully opened, for instance the bedroom of a child. The mechanism limits how far the sash can open to an appropriate height of 100mm and then it re-engages after the window is closed.
These uPVC friction-type hinges can be used on all kinds of windows. They are particularly suitable for windows that are difficult to reach, like those in three-storey apartments or those that require ladders. They can be upgraded with our security features, including hinge guards, or dog bolts to attain PAS 24 performance.
It is important to measure the hinges on your window to be able to find replacements that are the same size. This can be accomplished by looking at the picture gallery of the hinge before deciding the best place to put it. Top-hung hinges are limited to both sides and side-hung hinges are only restricted to one side.
Standard Hinge
A standard hinge has metal-to-metal contacts and has no additional parts to decrease friction. It is available in a variety of finishes, and is fire rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter and dime in two corners. If the quarter fits better then the corner should be rounded to 5/8 inches.
Choosing the right type of hinge can determine the success or failure of your door's appearance. It's essential to match the finish and style of your door to the hinges to create a seamless look that's both practical and visually attractive.